Original
By certification 
Higher PV conversion efficiency
This product has a smaller surface area and higher photoelectric conversion efficiency without affecting the output power.The smaller product size reduces the difficulty in transportation and installation. The photoelectric conversion efficiency of this Olive 60cells 9BB half-cut high efficiency module is 20 percent, 0.5 percent higher than the traditional one.
Industry-leading technological integration
This Olive 60 cells 9BB half-cut module integrates various technologies like half-cut cells and multi-busbar, with the highest power up to 365W. With the use of multi busbar, the current conduction distance is shorten by around 50% and thus lower the internal ribbon resistance loss. With finer and narrower busbars, more sunlight can be reflected back to the round ribbon, thus increasing energy efficiency. Besides, the unique circuit design of half-cut cells can reduce power loss caused by ribbon resistance to 1/4 compared to full cells, which results the decrease of electrical resistance within the ribbon and finally improves the overall module efficiency by more than 2%.
Higher return on investment thanks to higher power output
The output of this Olive 60 cells 9BB half-cut module is much higher than that of industry-typical 5BB PERC modules with the same specifications. Application of this 60 cells 9BB half-cut module can remarkably reduce the number of modules employed in a power station, thus lowering corresponding cost of supports, cables, construction and land, improving the return on investment.
Exceptional reliability
The Olive 60cells 9BB half-cut module is one of the industry’s most trusted solar modules. Low hot spot occurrence and half-cut cell technology can reduce failures, improving safety and performance. The application of multi-busbar cells results in more uniform loads to prevent stress, resulting in better performance even in case of slight cracking. Today,the market share of PV modules featuring MBB technology is dominant in the global solar industry.
SPECIFICATION | |
Cell: |
Mono 166*166mm |
No. Of cells: |
120(6*20) |
Measurement: |
1038*1775*35mm |
Weight： |
19.5Kg |
Glass: |
High transparency,low iron,AR coated tempered glass 3.2mm |
Frame: |
Anodized aluminum alloys |
Junction box: |
IP68 rated,with 3 bypass diode |
Output wire: |
4m㎡（EU）/12AWG(US),300mm Cable length |
Maximum System Voltage: |
1000/1500V DC |
Operating Temperature: |
-40℃~+85℃ |
Maximum rated fuse current: |
20A |
Output power tolerance: |
0~+4.99W |
Temperature coefficient of Pmax： |
-0.37%/℃ |
Temperature coefficient of Voc: |
-0.28%/℃ |
Temperature coefficient of Isc: |
0.048%/℃ |
NOCT: |
45±2℃ |
Specification（STC） | |||||||
Module Type |
OLV-350-60M-HC9H |
OLV-355-60M-HC9H |
OLV-360-60M-HC9H |
OLV-365-60M-HC9H |
OLV-370-60M-HC9H |
OLV-375-60M-HC9H |
OLV-380-60M-HC9H |
Pmax |
350 |
355 |
360 |
365 |
370 |
375 |
380 |
Voc |
39.92 |
40.09 |
40.26 |
40.43 |
40.60 |
40.77 |
40.94 |
Isc |
11.16 |
11.23 |
11.30 |
11.37 |
11.44 |
11.51 |
11.58 |
Vmp |
32.87 |
33.06 |
33.25 |
33.43 |
33.61 |
33.79 |
33.96 |
Imp |
10.65 |
10.74 |
10.83 |
10.92 |
11.01 |
11.10 |
11.19 |
|
Module Efficiency STC (%) |
19.2 |
19.5 |
19.8 |
20.0 |
20.3 |
20.6 |
20.9 |
Specification（NOTC） | |||||||
Module Type |
OLV-350-60M-HC9H |
OLV-355-60M-HC9H |
OLV-360-60M-HC9H |
OLV-365-60M-HC9H |
OLV-370-60M-HC9H |
OLV-375-60M-HC9H |
OLV-380-60M-HC9H |
Pmax |
259.7 |
264.1 |
268.5 |
272.8 |
277.2 |
281.6 |
286.0 |
Voc |
37.22 |
37.39 |
37.56 |
37.73 |
37.90 |
38.07 |
38.24 |
Isc |
8.99 |
9.06 |
9.13 |
9.20 |
9.27 |
9.34 |
9.41 |
Vmp |
30.27 |
30.46 |
30.65 |
30.83 |
31.01 |
31.19 |
31.36 |
Imp |
8.58 |
8.67 |
8.76 |
8.85 |
8.94 |
9.03 |
9.12 |
http://www.olivepv.com/
