Notes:

1. Standard unit water side design pressure is 1.0MPa, if any other request on pressure please contact us.

2. Cooling capacity is based on 27℃ db/19℃wb entering air, 30/35 entering/leaving water.

3. Heating capacity is is based on 20 ℃ db/15℃wb, 20 ℃ entering water and power input has included fan motor but not water pump.

4. The standard ESP is 0Pa, customize request is available.

5. Parameters above are subjected to change without notice due to continuous improvement.

Features:

1, Seven unit sizes from 3/4 to 3 tons

2, Fully run-tested with water in both heating and cooling modes

3, Rotary compressors on all units

4, Low installed cost

5, Small footprint

6, Reduced maintenance costs

7, R410A environmental friendly refrigerant

Safety Protections and Control Functions

Electric Shock Protection (it should be installed by client separately)

Internal or external installed compressor overload protector

High pressure trip protection

Low pressure trip protection

Water coil anti-freeze protection

Evaporator anti-freeze protection

Condensate overflow protection

Fan is interlocked with compressor operation：compressor is not allowed to be operated when fan is not running.

Compressor is interlocked with water valve: compressor is not allowed to be operated when water valve is closed

Thermostat can be mounted outside the unit, and return air temperature can be measured at thermostat or unit return air inlet

Questions & Answer:

1.Q: what is the MOQ of this vertical stack heat pump?

A: We accept with sample unit order, for batch order, the quantity will be based on 20GP container.

2. Q: what is standard warranty term?

A: The standard warranty is 12 months after installation or 18 months after shipment, whichever is shorter. We supply free parts for replacement during warranty.

http://www.mammoth-hvac.com/