Xiamen Keyuan Plastic Co.,Ltd is one of the professional conductive pa66 manufacturers, you can order high quality conductive pa66 at good price from our factory.
PA66-product Specifications
Specifications
Eletrical conductive PA66 Material
Good conductive performance.
conductive material :carbon fiber, carbon powder, metal powder.
the condition of injection molding process also has certain effect on conductive performance.
you are required to know the process parameters of conductive PA66, like temperature and pressure, or it will change its conductive performance
Product name |
PA6/PA66 reinforced with (5%-55%)GF / (10%-50%)toughness /(V0,V1,V2)FR/ UV |
Color |
As required |
Advantage |
Competitive price,high quality,on-time delivery,free sample |
Environment friendly | |
High Heat Resistance,High impact resistance | |
Without any impurity | |
Can be reinforced with the glass fiber/toughness/flame retardant/UV stabilizer | |
Packing |
25kg/bag (also can be customized) |
Item |
Typical Characteristic |
Testing Standard |
|
KY-N6701 |
KY-N6702 |
||
Density |
1.60g/cm3 |
1.55g/cm3 |
ASTM D-792 |
Ggraphite content |
10% |
20% |
--- |
Melt Flow Rate |
6g/10min |
4g/10min |
ASTM D-1238 |
Molding Shrinkage |
0.3-0.4% |
0.5-0.7% |
ASTM D-955 |
Water Absorption |
0.40% |
0.30% |
ASTM D-570 |
Tensile Strength |
60MPa |
75MPa |
ASTM D-638 |
Flexural Strength |
81MPa |
70MPa |
ASTM D-790 |
Elongation at break |
11% |
7% |
ASTM D-638 |
Flexural Modulus |
4500MPa |
4000MPa |
ASTM D-790 |
Izod Notched Impact Strength |
50J/m |
60J/m |
ASTM D-256 |
Melting Point |
245℃ |
260℃ |
ASTM D-648 |
Heat Deflection Temperature |
185℃ |
220℃ |
ASTM D-648 |
Flame Retardant |
V1 |
V1 |
UL 94 |
Surface Resistivity |
10^11 Ohms/square |
10^10 Ohms/square |
IEC60093(dry) |
Thermal conductivity |
0.6W/mK |
1.2±0.3W/mK |
ASTM D-5470 |
Volume Resistivity |
10^14Ω.cm |
10^12Ω.cm |
IEC60093(dry) |
Dielectric Strength |
50kV/mm |
20kV/mm |
IEC 60243-1 |
CTI |
450V |
580V |
IEC 60112 |
Use temperature | |||
Processing temperature : 250 - 290 °C | |||
Mould temperature : 100 - 120 °C | |||
Back pressure : ca.10 - 15 bar | |||
Injection speed : medium/high | |||
Pre-drying : necessary |